CVSS2
Attack Vector
NETWORK
Attack Complexity
MEDIUM
Authentication
NONE
Confidentiality Impact
NONE
Integrity Impact
NONE
Availability Impact
PARTIAL
AV:N/AC:M/Au:N/C:N/I:N/A:P
EPSS
Percentile
91.5%
Updated wireshark packages that fix several security issues, three bugs, and add one enhancement are now available for Red Hat Enterprise Linux 5.
The Red Hat Security Response Team has rated this update as having moderate security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links in the References section.
Wireshark, previously known as Ethereal, is a network protocol analyzer. It is used to capture and browse the traffic running on a computer network.
A heap-based buffer overflow flaw was found in the way Wireshark handled Endace ERF (Extensible Record Format) capture files. If Wireshark opened a specially crafted ERF capture file, it could crash or, possibly, execute arbitrary code as the user running Wireshark.
(CVE-2011-4102)
Several denial of service flaws were found in Wireshark. Wireshark could crash or stop responding if it read a malformed packet off a network, or opened a malicious dump file. (CVE-2011-1958, CVE-2011-1959, CVE-2011-2175, CVE-2011-2698, CVE-2012-0041, CVE-2012-0042, CVE-2012-0066, CVE-2012-0067, CVE-2012-4285, CVE-2012-4289, CVE-2012-4290, CVE-2012-4291)
The CVE-2011-1958, CVE-2011-1959, CVE-2011-2175, and CVE-2011-4102 issues were discovered by Huzaifa Sidhpurwala of the Red Hat Security Response Team.
This update also fixes the following bugs :
When Wireshark starts with the X11 protocol being tunneled through an SSH connection, it automatically prepares its capture filter to omit the SSH packets. If the SSH connection was to a link-local IPv6 address including an interface name (for example ssh -X [ipv6addr]%eth0), Wireshark parsed this address erroneously, constructed an incorrect capture filter and refused to capture packets. The ‘Invalid capture filter’ message was displayed. With this update, parsing of link-local IPv6 addresses is fixed and Wireshark correctly prepares a capture filter to omit SSH packets over a link-local IPv6 connection. (BZ#438473)
Previously, Wireshark’s column editing dialog malformed column names when they were selected. With this update, the dialog is fixed and no longer breaks column names. (BZ#493693)
Previously, TShark, the console packet analyzer, did not properly analyze the exit code of Dumpcap, Wireshark’s packet capturing back end. As a result, TShark returned exit code 0 when Dumpcap failed to parse its command-line arguments. In this update, TShark correctly propagates the Dumpcap exit code and returns a non-zero exit code when Dumpcap fails. (BZ#580510)
Previously, the TShark ‘-s’ (snapshot length) option worked only for a value greater than 68 bytes. If a lower value was specified, TShark captured just 68 bytes of incoming packets. With this update, the ‘-s’ option is fixed and sizes lower than 68 bytes work as expected.
(BZ#580513)
This update also adds the following enhancement :
All users of Wireshark are advised to upgrade to these updated packages, which contain backported patches to correct these issues and add this enhancement. All running instances of Wireshark must be restarted for the update to take effect.
#%NASL_MIN_LEVEL 70300
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from Red Hat Security Advisory RHSA-2013:0125 and
# CentOS Errata and Security Advisory 2013:0125 respectively.
#
include('deprecated_nasl_level.inc');
include('compat.inc');
if (description)
{
script_id(63570);
script_version("1.13");
script_set_attribute(attribute:"plugin_modification_date", value:"2021/01/04");
script_cve_id("CVE-2011-1958", "CVE-2011-1959", "CVE-2011-2175", "CVE-2011-2698", "CVE-2011-4102", "CVE-2012-0041", "CVE-2012-0042", "CVE-2012-0066", "CVE-2012-0067", "CVE-2012-4285", "CVE-2012-4289", "CVE-2012-4290", "CVE-2012-4291");
script_bugtraq_id(48066, 49071, 50486, 51368, 51710, 55035);
script_xref(name:"RHSA", value:"2013:0125");
script_name(english:"CentOS 5 : wireshark (CESA-2013:0125)");
script_summary(english:"Checks rpm output for the updated packages");
script_set_attribute(
attribute:"synopsis",
value:"The remote CentOS host is missing one or more security updates."
);
script_set_attribute(
attribute:"description",
value:
"Updated wireshark packages that fix several security issues, three
bugs, and add one enhancement are now available for Red Hat Enterprise
Linux 5.
The Red Hat Security Response Team has rated this update as having
moderate security impact. Common Vulnerability Scoring System (CVSS)
base scores, which give detailed severity ratings, are available for
each vulnerability from the CVE links in the References section.
Wireshark, previously known as Ethereal, is a network protocol
analyzer. It is used to capture and browse the traffic running on a
computer network.
A heap-based buffer overflow flaw was found in the way Wireshark
handled Endace ERF (Extensible Record Format) capture files. If
Wireshark opened a specially crafted ERF capture file, it could crash
or, possibly, execute arbitrary code as the user running Wireshark.
(CVE-2011-4102)
Several denial of service flaws were found in Wireshark. Wireshark
could crash or stop responding if it read a malformed packet off a
network, or opened a malicious dump file. (CVE-2011-1958,
CVE-2011-1959, CVE-2011-2175, CVE-2011-2698, CVE-2012-0041,
CVE-2012-0042, CVE-2012-0066, CVE-2012-0067, CVE-2012-4285,
CVE-2012-4289, CVE-2012-4290, CVE-2012-4291)
The CVE-2011-1958, CVE-2011-1959, CVE-2011-2175, and CVE-2011-4102
issues were discovered by Huzaifa Sidhpurwala of the Red Hat Security
Response Team.
This update also fixes the following bugs :
* When Wireshark starts with the X11 protocol being tunneled through
an SSH connection, it automatically prepares its capture filter to
omit the SSH packets. If the SSH connection was to a link-local IPv6
address including an interface name (for example ssh -X
[ipv6addr]%eth0), Wireshark parsed this address erroneously,
constructed an incorrect capture filter and refused to capture
packets. The 'Invalid capture filter' message was displayed. With this
update, parsing of link-local IPv6 addresses is fixed and Wireshark
correctly prepares a capture filter to omit SSH packets over a
link-local IPv6 connection. (BZ#438473)
* Previously, Wireshark's column editing dialog malformed column names
when they were selected. With this update, the dialog is fixed and no
longer breaks column names. (BZ#493693)
* Previously, TShark, the console packet analyzer, did not properly
analyze the exit code of Dumpcap, Wireshark's packet capturing back
end. As a result, TShark returned exit code 0 when Dumpcap failed to
parse its command-line arguments. In this update, TShark correctly
propagates the Dumpcap exit code and returns a non-zero exit code when
Dumpcap fails. (BZ#580510)
* Previously, the TShark '-s' (snapshot length) option worked only for
a value greater than 68 bytes. If a lower value was specified, TShark
captured just 68 bytes of incoming packets. With this update, the '-s'
option is fixed and sizes lower than 68 bytes work as expected.
(BZ#580513)
This update also adds the following enhancement :
* In this update, support for the 'NetDump' protocol was added.
(BZ#484999)
All users of Wireshark are advised to upgrade to these updated
packages, which contain backported patches to correct these issues and
add this enhancement. All running instances of Wireshark must be
restarted for the update to take effect."
);
# https://lists.centos.org/pipermail/centos-announce/2013-January/019123.html
script_set_attribute(
attribute:"see_also",
value:"http://www.nessus.org/u?fccd8ef5"
);
# https://lists.centos.org/pipermail/centos-cr-announce/2013-January/000457.html
script_set_attribute(
attribute:"see_also",
value:"http://www.nessus.org/u?35623b9f"
);
script_set_attribute(
attribute:"solution",
value:"Update the affected wireshark packages."
);
script_set_cvss_base_vector("CVSS2#AV:N/AC:M/Au:N/C:N/I:N/A:P");
script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
script_set_attribute(attribute:"cvss_score_source", value:"CVE-2011-1958");
script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
script_set_attribute(attribute:"exploit_available", value:"true");
script_set_attribute(attribute:"plugin_type", value:"local");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:centos:centos:wireshark");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:centos:centos:wireshark-gnome");
script_set_attribute(attribute:"cpe", value:"cpe:/o:centos:centos:5");
script_set_attribute(attribute:"vuln_publication_date", value:"2011/06/06");
script_set_attribute(attribute:"patch_publication_date", value:"2013/01/09");
script_set_attribute(attribute:"plugin_publication_date", value:"2013/01/17");
script_set_attribute(attribute:"generated_plugin", value:"current");
script_end_attributes();
script_category(ACT_GATHER_INFO);
script_copyright(english:"This script is Copyright (C) 2013-2021 and is owned by Tenable, Inc. or an Affiliate thereof.");
script_family(english:"CentOS Local Security Checks");
script_dependencies("ssh_get_info.nasl");
script_require_keys("Host/local_checks_enabled", "Host/CentOS/release", "Host/CentOS/rpm-list");
exit(0);
}
include("audit.inc");
include("global_settings.inc");
include("rpm.inc");
if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/CentOS/release");
if (isnull(release) || "CentOS" >!< release) audit(AUDIT_OS_NOT, "CentOS");
os_ver = pregmatch(pattern: "CentOS(?: Linux)? release ([0-9]+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "CentOS");
os_ver = os_ver[1];
if (! preg(pattern:"^5([^0-9]|$)", string:os_ver)) audit(AUDIT_OS_NOT, "CentOS 5.x", "CentOS " + os_ver);
if (!get_kb_item("Host/CentOS/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if ("x86_64" >!< cpu && cpu !~ "^i[3-6]86$") audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "CentOS", cpu);
flag = 0;
if (rpm_check(release:"CentOS-5", reference:"wireshark-1.0.15-5.el5")) flag++;
if (rpm_check(release:"CentOS-5", reference:"wireshark-gnome-1.0.15-5.el5")) flag++;
if (flag)
{
cr_plugin_caveat = '\n' +
'NOTE: The security advisory associated with this vulnerability has a\n' +
'fixed package version that may only be available in the continuous\n' +
'release (CR) repository for CentOS, until it is present in the next\n' +
'point release of CentOS.\n\n' +
'If an equal or higher package level does not exist in the baseline\n' +
'repository for your major version of CentOS, then updates from the CR\n' +
'repository will need to be applied in order to address the\n' +
'vulnerability.\n';
security_report_v4(
port : 0,
severity : SECURITY_WARNING,
extra : rpm_report_get() + cr_plugin_caveat
);
exit(0);
}
else
{
tested = pkg_tests_get();
if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
else audit(AUDIT_PACKAGE_NOT_INSTALLED, "wireshark / wireshark-gnome");
}
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1958
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-1959
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2175
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-2698
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2011-4102
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0041
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0042
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0066
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-0067
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-4285
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-4289
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-4290
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-4291
www.nessus.org/u?35623b9f
www.nessus.org/u?fccd8ef5