CVSS2
Attack Vector
LOCAL
Attack Complexity
HIGH
Authentication
NONE
Confidentiality Impact
COMPLETE
Integrity Impact
COMPLETE
Availability Impact
COMPLETE
AV:L/AC:H/Au:N/C:C/I:C/A:C
CVSS3
Attack Vector
LOCAL
Attack Complexity
HIGH
Privileges Required
LOW
User Interaction
REQUIRED
Scope
CHANGED
Confidentiality Impact
HIGH
Integrity Impact
HIGH
Availability Impact
NONE
CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:C/C:H/I:H/A:N
AI Score
Confidence
High
EPSS
Percentile
35.5%
This is a version update for podman to version 1.4.4 (bsc#1143386).
Additional changes by SUSE on top :
Remove fuse-overlayfs because it’s (currently) an unsatisfied dependency on SLE (bsc#1143386)
Update libpod.conf to use correct infra_command
Update libpod.conf to use better versioned pause container
Update libpod.conf to use official kubic pause container
Update libpod.conf to match latest features set: detach_keys, lock_type, runtime_supports_json
Add podman-remote varlink client
Version update podman to v1.4.4: Features
Podman now has greatly improved support for containers using multiple OCI runtimes. Containers now remember if they were created with a different runtime using
–runtime and will always use that runtime
The cached and delegated options for volume mounts are now allowed for Docker compatability (#3340)
The podman diff command now supports the --latest flag Bugfixes
Fixed a bug where rootless Podman would attempt to use the entire root configuration if no rootless configuration was present for the user, breaking rootless Podman for new installations
Fixed a bug where rootless Podman’s pause process would block SIGTERM, preventing graceful system shutdown and hanging until the system’s init send SIGKILL
Fixed a bug where running Podman as root with sudo -E would not work after running rootless Podman at least once
Fixed a bug where options for tmpfs volumes added with the --tmpfs flag were being ignored
Fixed a bug where images with no layers could not properly be displayed and removed by Podman
Fixed a bug where locks were not properly freed on failure to create a container or pod
Fixed a bug where podman cp on a single file would create a directory at the target and place the file in it (#3384)
Fixed a bug where podman inspect --format ‘{{.Mounts}}’ would print a hexadecimal address instead of a container’s mounts
Fixed a bug where rootless Podman would not add an entry to container’s /etc/hosts files for their own hostname (#3405)
Fixed a bug where podman ps --sync would segfault (#3411)
Fixed a bug where podman generate kube would produce an invalid ports configuration (#3408) Misc
Updated containers/storage to v1.12.13
Podman now performs much better on systems with heavy I/O load
The --cgroup-manager flag to podman now shows the correct default setting in help if the default was overridden by libpod.conf
For backwards compatability, setting
–log-driver=json-file in podman run is now supported as an alias for --log-driver=k8s-file. This is considered deprecated, and json-file will be moved to a new implementation in the future ([#3363](https://github.com/containers/libpo\ d/issues/3363))
Podman’s default libpod.conf file now allows the crun OCI runtime to be used if it is installed
Update podman to v1.4.2: Fixed a bug where Podman could not run containers using an older version of Systemd as init
Updated vendored Buildah to v1.9.0 to resolve a critical bug with Dockerfile RUN instructions
The error message for running podman kill on containers that are not running has been improved
Podman remote client can now log to a file if syslog is not available
The podman exec command now sets its error code differently based on whether the container does not exist, and the command in the container does not exist
The podman inspect command on containers now outputs Mounts JSON that matches that of docker inspect, only including user-specified volumes and differentiating bind mounts and named volumes
The podman inspect command now reports the path to a container’s OCI spec with the OCIConfigPath key (only included when the container is initialized or running)
The podman run --mount command now supports the bind-nonrecursive option for bind mounts
Fixed a bug where podman play kube would fail to create containers due to an unspecified log driver
Fixed a bug where Podman would fail to build with musl libc
Fixed a bug where rootless Podman using slirp4netns networking in an environment with no nameservers on the host other than localhost would result in nonfunctional networking
Fixed a bug where podman import would not properly set environment variables, discarding their values and retaining only keys
Fixed a bug where Podman would fail to run when built with Apparmor support but run on systems without the Apparmor kernel module loaded
Remote Podman will now default the username it uses to log in to remote systems to the username of the current user
Podman now uses JSON logging with OCI runtimes that support it, allowing for better error reporting
Updated vendored containers/image to v2.0
Update conmon to v0.3.0
Support OOM Monitor under cgroup V2
Add config binary and make target for configuring conmon with a go library for importing values
Updated podman to version 1.4.0 (bsc#1137860) and (bsc#1135460) Podman checkpoint and podman restore commands can now be used to migrate containers between Podman installations on different systems.
The podman cp now supports pause flag.
The remote client now supports a configuration file for pre-configuring connections to remote Podman installations
CVE-2019-10152: Fixed an iproper dereference of symlinks of the the podman cp command which introduced in version 1.1.0 (bsc#1136974).
Fixed a bug where podman commit could improperly set environment variables that contained = characters
Fixed a bug where rootless podman would sometimes fail to start containers with forwarded ports
Fixed a bug where podman version on the remote client could segfault
Fixed a bug where podman container runlabel would use /proc/self/exe instead of the path of the Podman command when printing the command being executed
Fixed a bug where filtering images by label did not work
Fixed a bug where specifying a bing mount or tmpfs mount over an image volume would cause a container to be unable to start
Fixed a bug where podman generate kube did not work with containers with named volumes
Fixed a bug where rootless podman would receive permission denied errors accessing conmon.pid
Fixed a bug where podman cp with a folder specified as target would replace the folder, as opposed to copying into it
Fixed a bug where rootless Podman commands could double-unlock a lock, causing a crash
Fixed a bug where podman incorrectly set tmpcopyup on /dev/ mounts, causing errors when using the Kata containers runtime
Fixed a bug where podman exec would fail on older kernels
Podman commit command is now usable with the Podman remote client
Signature-policy flag has been deprecated
Updated vendored containers/storage and containers/image libraries with numerous bugfixes
Updated vendored Buildah to v1.8.3
Podman now requires Conmon v0.2.0
The podman cp command is now aliased as podman container cp
Rootless podman will now default init_path using root Podman’s configuration files (/etc/containers/libpod.conf and /usr/share/containers/libpod.conf) if not overridden in the rootless configuration
Added fuse-overlayfs dependency to support overlay based rootless image manipulations
The podman cp command can now read input redirected to STDIN, and output to STDOUT instead of a file, using - instead of an argument.
The podman remote client now displays version information from both the client and server in podman version
The podman unshare command has been added, allowing easy entry into the user namespace set up by rootless Podman (allowing the removal of files created by rootless podman, among other things)
Fixed a bug where Podman containers with the --rm flag were removing created volumes when they were automatically removed
Fixed a bug where container and pod locks were incorrectly marked as released after a system reboot, causing errors on container and pod removal
Fixed a bug where Podman pods could not be removed if any container in the pod encountered an error during removal
Fixed a bug where Podman pods run with the cgroupfs CGroup driver would encounter a race condition during removal, potentially failing to remove the pod CGroup
Fixed a bug where the podman container checkpoint and podman container restore commands were not visible in the remote client
Fixed a bug where podman remote ps --ns would not print the container’s namespaces
Fixed a bug where removing stopped containers with healthchecks could cause an error
Fixed a bug where the default libpod.conf file was causing parsing errors
Fixed a bug where pod locks were not being freed when pods were removed, potentially leading to lock exhaustion
Fixed a bug where ‘podman run’ with SD_NOTIFY set could, on short-running containers, create an inconsistent state rendering the container unusable
The remote Podman client now uses the Varlink bridge to establish remote connections by default
Fixed an issue with apparmor_parser (bsc#1123387)
Update to libpod v1.4.0 (bsc#1137860) :
The podman checkpoint and podman restore commands can now be used to migrate containers between Podman installations on different systems
The podman cp command now supports a pause flag to pause containers while copying into them
The remote client now supports a configuration file for pre-configuring connections to remote Podman installations
Fixed CVE-2019-10152 - The podman cp command improperly dereferenced symlinks in host context
Fixed a bug where podman commit could improperly set environment variables that contained = characters
Fixed a bug where rootless Podman would sometimes fail to start containers with forwarded ports
Fixed a bug where podman version on the remote client could segfault
Fixed a bug where podman container runlabel would use /proc/self/exe instead of the path of the Podman command when printing the command being executed
Fixed a bug where filtering images by label did not work
Fixed a bug where specifying a bing mount or tmpfs mount over an image volume would cause a container to be unable to start
Fixed a bug where podman generate kube did not work with containers with named volumes
Fixed a bug where rootless Podman would receive permission denied errors accessing conmon.pid
Fixed a bug where podman cp with a folder specified as target would replace the folder, as opposed to copying into it
Fixed a bug where rootless Podman commands could double-unlock a lock, causing a crash
Fixed a bug where Podman incorrectly set tmpcopyup on /dev/ mounts, causing errors when using the Kata containers runtime
Fixed a bug where podman exec would fail on older kernels
The podman commit command is now usable with the Podman remote client
The --signature-policy flag (used with several image-related commands) has been deprecated
The podman unshare command now defines two environment variables in the spawned shell: CONTAINERS_RUNROOT and CONTAINERS_GRAPHROOT, pointing to temporary and permanent storage for rootless containers
Updated vendored containers/storage and containers/image libraries with numerous bugfixes
Updated vendored Buildah to v1.8.3
Podman now requires Conmon v0.2.0
The podman cp command is now aliased as podman container cp
Rootless Podman will now default init_path using root Podman’s configuration files (/etc/containers/libpod.conf and /usr/share/containers/libpod.conf) if not overridden in the rootless configuration
Update to image v1.5.1
Vendor in latest containers/storage
docker/docker_client: Drop redundant Domain(ref.ref) call
pkg/blobinfocache: Split implementations into subpackages
copy: progress bar: show messages on completion
docs: rename manpages to *.5.command
add container-certs.d.md manpage
pkg/docker/config: Bring auth tests from docker/docker_client_test
Don’t allocate a sync.Mutex separately
Update to storage v1.12.10: Add function to parse out mount options from graphdriver
Merge the disparate parts of all of the Unix-like lockfiles
Fix unix-but-not-Linux compilation
Return XDG_RUNTIME_DIR as RootlessRuntimeDir if set
Cherry-pick moby/moby #39292 for CVE-2018-15664 fixes
lockfile: add RecursiveLock() API
Update generated files
Fix crash on tesing of aufs code
Let consumers know when Layers and Images came from read-only stores
chown: do not change owner for the mountpoint
locks: correctly mark updates to the layers list
CreateContainer: don’t worry about mapping layers unless necessary
docs: fix manpage for containers-storage.conf
docs: sort configuration options alphabetically
docs: document OSTree file deduplication
Add missing options to man page for containers-storage
overlay: use the layer idmapping if present
vfs: prefer layer custom idmappings
layers: propagate down the idmapping settings
Recreate symlink when not found
docs: fix manpage for configuration file
docs: add special handling for manpages in sect 5
overlay: fix single-lower test
Recreate symlink when not found
overlay: propagate errors from mountProgram
utils: root in a userns uses global conf file
Fix handling of additional stores
Correctly check permissions on rootless directory
Fix possible integer overflow on 32bit builds
Evaluate device path for lvm
lockfile test: make concurrent RW test determinisitc
lockfile test: make concurrent read tests deterministic
drivers.DirCopy: fix filemode detection
storage: move the logic to detect rootless into utils.go
Don’t set (struct flock).l_pid
Improve documentation of getLockfile
Rename getLockFile to createLockerForPath, and document it
Add FILES section to containers-storage.5 man page
add digest locks
drivers/copy: add a non-cgo fallback
slirp4netns was updated to 0.3.0: CVE-2019-6778: Fixed a heap buffer overflow in tcp_emu() (bsc#1123156)
This update also includes: fuse3 and fuse-overlayfs to support rootless containers.
Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.
#
# (C) Tenable Network Security, Inc.
#
# The descriptive text and package checks in this plugin were
# extracted from SUSE update advisory SUSE-SU-2019:2223-1.
# The text itself is copyright (C) SUSE.
#
include('compat.inc');
if (description)
{
script_id(128302);
script_version("1.5");
script_set_attribute(attribute:"plugin_modification_date", value:"2024/04/30");
script_cve_id("CVE-2018-15664", "CVE-2019-6778", "CVE-2019-10152");
script_name(english:"SUSE SLES15 Security Update : podman, slirp4netns / libcontainers-common (SUSE-SU-2019:2223-1)");
script_set_attribute(attribute:"synopsis", value:
"The remote SUSE host is missing one or more security updates.");
script_set_attribute(attribute:"description", value:
"This is a version update for podman to version 1.4.4 (bsc#1143386).
Additional changes by SUSE on top :
Remove fuse-overlayfs because it's (currently) an unsatisfied
dependency on SLE (bsc#1143386)
Update libpod.conf to use correct infra_command
Update libpod.conf to use better versioned pause container
Update libpod.conf to use official kubic pause container
Update libpod.conf to match latest features set: detach_keys,
lock_type, runtime_supports_json
Add podman-remote varlink client
Version update podman to v1.4.4: Features
- Podman now has greatly improved support for containers
using multiple OCI runtimes. Containers now remember if
they were created with a different runtime using
--runtime and will always use that runtime
- The cached and delegated options for volume mounts are
now allowed for Docker compatability (#3340)
- The podman diff command now supports the --latest flag
Bugfixes
- Fixed a bug where rootless Podman would attempt to use
the entire root configuration if no rootless
configuration was present for the user, breaking
rootless Podman for new installations
- Fixed a bug where rootless Podman's pause process would
block SIGTERM, preventing graceful system shutdown and
hanging until the system's init send SIGKILL
- Fixed a bug where running Podman as root with sudo -E
would not work after running rootless Podman at least
once
- Fixed a bug where options for tmpfs volumes added with
the --tmpfs flag were being ignored
- Fixed a bug where images with no layers could not
properly be displayed and removed by Podman
- Fixed a bug where locks were not properly freed on
failure to create a container or pod
- Fixed a bug where podman cp on a single file would
create a directory at the target and place the file in
it (#3384)
- Fixed a bug where podman inspect --format '{{.Mounts}}'
would print a hexadecimal address instead of a
container's mounts
- Fixed a bug where rootless Podman would not add an entry
to container's /etc/hosts files for their own hostname
(#3405)
- Fixed a bug where podman ps --sync would segfault
(#3411)
- Fixed a bug where podman generate kube would produce an
invalid ports configuration (#3408) Misc
- Updated containers/storage to v1.12.13
- Podman now performs much better on systems with heavy
I/O load
- The --cgroup-manager flag to podman now shows the
correct default setting in help if the default was
overridden by libpod.conf
- For backwards compatability, setting
--log-driver=json-file in podman run is now supported as
an alias for --log-driver=k8s-file. This is considered
deprecated, and json-file will be moved to a new
implementation in the future
([#3363](https://github.com/containers/libpo\
d/issues/3363))
- Podman's default libpod.conf file now allows the crun
OCI runtime to be used if it is installed
Update podman to v1.4.2: Fixed a bug where Podman could not run
containers using an older version of Systemd as init
Updated vendored Buildah to v1.9.0 to resolve a critical bug with
Dockerfile RUN instructions
The error message for running podman kill on containers that are not
running has been improved
Podman remote client can now log to a file if syslog is not available
The podman exec command now sets its error code differently based on
whether the container does not exist, and the command in the container
does not exist
The podman inspect command on containers now outputs Mounts JSON that
matches that of docker inspect, only including user-specified volumes
and differentiating bind mounts and named volumes
The podman inspect command now reports the path to a container's OCI
spec with the OCIConfigPath key (only included when the container is
initialized or running)
The podman run --mount command now supports the bind-nonrecursive
option for bind mounts
Fixed a bug where podman play kube would fail to create containers due
to an unspecified log driver
Fixed a bug where Podman would fail to build with musl libc
Fixed a bug where rootless Podman using slirp4netns networking in an
environment with no nameservers on the host other than localhost would
result in nonfunctional networking
Fixed a bug where podman import would not properly set environment
variables, discarding their values and retaining only keys
Fixed a bug where Podman would fail to run when built with Apparmor
support but run on systems without the Apparmor kernel module loaded
Remote Podman will now default the username it uses to log in to
remote systems to the username of the current user
Podman now uses JSON logging with OCI runtimes that support it,
allowing for better error reporting
Updated vendored containers/image to v2.0
Update conmon to v0.3.0
Support OOM Monitor under cgroup V2
Add config binary and make target for configuring conmon with a go
library for importing values
Updated podman to version 1.4.0 (bsc#1137860) and (bsc#1135460) Podman
checkpoint and podman restore commands can now be used to migrate
containers between Podman installations on different systems.
The podman cp now supports pause flag.
The remote client now supports a configuration file for
pre-configuring connections to remote Podman installations
CVE-2019-10152: Fixed an iproper dereference of symlinks of the the
podman cp command which introduced in version 1.1.0 (bsc#1136974).
Fixed a bug where podman commit could improperly set environment
variables that contained = characters
Fixed a bug where rootless podman would sometimes fail to start
containers with forwarded ports
Fixed a bug where podman version on the remote client could segfault
Fixed a bug where podman container runlabel would use /proc/self/exe
instead of the path of the Podman command when printing the command
being executed
Fixed a bug where filtering images by label did not work
Fixed a bug where specifying a bing mount or tmpfs mount over an image
volume would cause a container to be unable to start
Fixed a bug where podman generate kube did not work with containers
with named volumes
Fixed a bug where rootless podman would receive permission denied
errors accessing conmon.pid
Fixed a bug where podman cp with a folder specified as target would
replace the folder, as opposed to copying into it
Fixed a bug where rootless Podman commands could double-unlock a lock,
causing a crash
Fixed a bug where podman incorrectly set tmpcopyup on /dev/ mounts,
causing errors when using the Kata containers runtime
Fixed a bug where podman exec would fail on older kernels
Podman commit command is now usable with the Podman remote client
Signature-policy flag has been deprecated
Updated vendored containers/storage and containers/image libraries
with numerous bugfixes
Updated vendored Buildah to v1.8.3
Podman now requires Conmon v0.2.0
The podman cp command is now aliased as podman container cp
Rootless podman will now default init_path using root Podman's
configuration files (/etc/containers/libpod.conf and
/usr/share/containers/libpod.conf) if not overridden in the rootless
configuration
Added fuse-overlayfs dependency to support overlay based rootless
image manipulations
The podman cp command can now read input redirected to STDIN, and
output to STDOUT instead of a file, using - instead of an argument.
The podman remote client now displays version information from both
the client and server in podman version
The podman unshare command has been added, allowing easy entry into
the user namespace set up by rootless Podman (allowing the removal of
files created by rootless podman, among other things)
Fixed a bug where Podman containers with the --rm flag were removing
created volumes when they were automatically removed
Fixed a bug where container and pod locks were incorrectly marked as
released after a system reboot, causing errors on container and pod
removal
Fixed a bug where Podman pods could not be removed if any container in
the pod encountered an error during removal
Fixed a bug where Podman pods run with the cgroupfs CGroup driver
would encounter a race condition during removal, potentially failing
to remove the pod CGroup
Fixed a bug where the podman container checkpoint and podman container
restore commands were not visible in the remote client
Fixed a bug where podman remote ps --ns would not print the
container's namespaces
Fixed a bug where removing stopped containers with healthchecks could
cause an error
Fixed a bug where the default libpod.conf file was causing parsing
errors
Fixed a bug where pod locks were not being freed when pods were
removed, potentially leading to lock exhaustion
Fixed a bug where 'podman run' with SD_NOTIFY set could, on
short-running containers, create an inconsistent state rendering the
container unusable
The remote Podman client now uses the Varlink bridge to establish
remote connections by default
Fixed an issue with apparmor_parser (bsc#1123387)
Update to libpod v1.4.0 (bsc#1137860) :
The podman checkpoint and podman restore commands can now be used to
migrate containers between Podman installations on different systems
The podman cp command now supports a pause flag to pause containers
while copying into them
The remote client now supports a configuration file for
pre-configuring connections to remote Podman installations
Fixed CVE-2019-10152 - The podman cp command improperly dereferenced
symlinks in host context
Fixed a bug where podman commit could improperly set environment
variables that contained = characters
Fixed a bug where rootless Podman would sometimes fail to start
containers with forwarded ports
Fixed a bug where podman version on the remote client could segfault
Fixed a bug where podman container runlabel would use /proc/self/exe
instead of the path of the Podman command when printing the command
being executed
Fixed a bug where filtering images by label did not work
Fixed a bug where specifying a bing mount or tmpfs mount over an image
volume would cause a container to be unable to start
Fixed a bug where podman generate kube did not work with containers
with named volumes
Fixed a bug where rootless Podman would receive permission denied
errors accessing conmon.pid
Fixed a bug where podman cp with a folder specified as target would
replace the folder, as opposed to copying into it
Fixed a bug where rootless Podman commands could double-unlock a lock,
causing a crash
Fixed a bug where Podman incorrectly set tmpcopyup on /dev/ mounts,
causing errors when using the Kata containers runtime
Fixed a bug where podman exec would fail on older kernels
The podman commit command is now usable with the Podman remote client
The --signature-policy flag (used with several image-related commands)
has been deprecated
The podman unshare command now defines two environment variables in
the spawned shell: CONTAINERS_RUNROOT and CONTAINERS_GRAPHROOT,
pointing to temporary and permanent storage for rootless containers
Updated vendored containers/storage and containers/image libraries
with numerous bugfixes
Updated vendored Buildah to v1.8.3
Podman now requires Conmon v0.2.0
The podman cp command is now aliased as podman container cp
Rootless Podman will now default init_path using root Podman's
configuration files (/etc/containers/libpod.conf and
/usr/share/containers/libpod.conf) if not overridden in the rootless
configuration
Update to image v1.5.1
Vendor in latest containers/storage
docker/docker_client: Drop redundant Domain(ref.ref) call
pkg/blobinfocache: Split implementations into subpackages
copy: progress bar: show messages on completion
docs: rename manpages to *.5.command
add container-certs.d.md manpage
pkg/docker/config: Bring auth tests from docker/docker_client_test
Don't allocate a sync.Mutex separately
Update to storage v1.12.10: Add function to parse out mount options
from graphdriver
Merge the disparate parts of all of the Unix-like lockfiles
Fix unix-but-not-Linux compilation
Return XDG_RUNTIME_DIR as RootlessRuntimeDir if set
Cherry-pick moby/moby #39292 for CVE-2018-15664 fixes
lockfile: add RecursiveLock() API
Update generated files
Fix crash on tesing of aufs code
Let consumers know when Layers and Images came from read-only stores
chown: do not change owner for the mountpoint
locks: correctly mark updates to the layers list
CreateContainer: don't worry about mapping layers unless necessary
docs: fix manpage for containers-storage.conf
docs: sort configuration options alphabetically
docs: document OSTree file deduplication
Add missing options to man page for containers-storage
overlay: use the layer idmapping if present
vfs: prefer layer custom idmappings
layers: propagate down the idmapping settings
Recreate symlink when not found
docs: fix manpage for configuration file
docs: add special handling for manpages in sect 5
overlay: fix single-lower test
Recreate symlink when not found
overlay: propagate errors from mountProgram
utils: root in a userns uses global conf file
Fix handling of additional stores
Correctly check permissions on rootless directory
Fix possible integer overflow on 32bit builds
Evaluate device path for lvm
lockfile test: make concurrent RW test determinisitc
lockfile test: make concurrent read tests deterministic
drivers.DirCopy: fix filemode detection
storage: move the logic to detect rootless into utils.go
Don't set (struct flock).l_pid
Improve documentation of getLockfile
Rename getLockFile to createLockerForPath, and document it
Add FILES section to containers-storage.5 man page
add digest locks
drivers/copy: add a non-cgo fallback
slirp4netns was updated to 0.3.0: CVE-2019-6778: Fixed a heap buffer
overflow in tcp_emu() (bsc#1123156)
This update also includes: fuse3 and fuse-overlayfs to support
rootless containers.
Note that Tenable Network Security has extracted the preceding
description block directly from the SUSE security advisory. Tenable
has attempted to automatically clean and format it as much as possible
without introducing additional issues.");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1096726");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123156");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1123387");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1135460");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1136974");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1137860");
script_set_attribute(attribute:"see_also", value:"https://bugzilla.suse.com/show_bug.cgi?id=1143386");
script_set_attribute(attribute:"see_also", value:"https://github.com/containers/libpo\");
script_set_attribute(attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2018-15664/");
script_set_attribute(attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-10152/");
script_set_attribute(attribute:"see_also", value:"https://www.suse.com/security/cve/CVE-2019-6778/");
# https://www.suse.com/support/update/announcement/2019/suse-su-20192223-1/
script_set_attribute(attribute:"see_also", value:"http://www.nessus.org/u?c3f6900a");
script_set_attribute(attribute:"solution", value:
"To install this SUSE Security Update use the SUSE recommended
installation methods like YaST online_update or 'zypper patch'.
Alternatively you can run the command listed for your product :
SUSE Linux Enterprise Module for Containers 15-SP1:zypper in -t patch
SUSE-SLE-Module-Containers-15-SP1-2019-2223=1
SUSE Linux Enterprise Module for Basesystem 15-SP1:zypper in -t patch
SUSE-SLE-Module-Basesystem-15-SP1-2019-2223=1");
script_set_cvss_base_vector("CVSS2#AV:L/AC:H/Au:N/C:C/I:C/A:C");
script_set_cvss_temporal_vector("CVSS2#E:POC/RL:OF/RC:C");
script_set_cvss3_base_vector("CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H");
script_set_cvss3_temporal_vector("CVSS:3.0/E:P/RL:O/RC:C");
script_set_attribute(attribute:"cvss_score_source", value:"CVE-2018-15664");
script_set_attribute(attribute:"cvss3_score_source", value:"CVE-2019-6778");
script_set_attribute(attribute:"exploitability_ease", value:"Exploits are available");
script_set_attribute(attribute:"exploit_available", value:"true");
script_set_attribute(attribute:"vuln_publication_date", value:"2019/03/21");
script_set_attribute(attribute:"patch_publication_date", value:"2019/08/27");
script_set_attribute(attribute:"plugin_publication_date", value:"2019/08/28");
script_set_attribute(attribute:"plugin_type", value:"local");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:fuse-overlayfs");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:fuse-overlayfs-debuginfo");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:fuse-overlayfs-debugsource");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:fuse3");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:fuse3-debuginfo");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:fuse3-debugsource");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libfuse3");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:libfuse3-3-debuginfo");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:podman");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:slirp4netns");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:slirp4netns-debuginfo");
script_set_attribute(attribute:"cpe", value:"p-cpe:/a:novell:suse_linux:slirp4netns-debugsource");
script_set_attribute(attribute:"cpe", value:"cpe:/o:novell:suse_linux:15");
script_set_attribute(attribute:"generated_plugin", value:"current");
script_end_attributes();
script_category(ACT_GATHER_INFO);
script_family(english:"SuSE Local Security Checks");
script_copyright(english:"This script is Copyright (C) 2019-2024 and is owned by Tenable, Inc. or an Affiliate thereof.");
script_dependencies("ssh_get_info.nasl");
script_require_keys("Host/local_checks_enabled", "Host/cpu", "Host/SuSE/release", "Host/SuSE/rpm-list");
exit(0);
}
include("audit.inc");
include("global_settings.inc");
include("rpm.inc");
if (!get_kb_item("Host/local_checks_enabled")) audit(AUDIT_LOCAL_CHECKS_NOT_ENABLED);
release = get_kb_item("Host/SuSE/release");
if (isnull(release) || release !~ "^(SLED|SLES)") audit(AUDIT_OS_NOT, "SUSE");
os_ver = pregmatch(pattern: "^(SLE(S|D)\d+)", string:release);
if (isnull(os_ver)) audit(AUDIT_UNKNOWN_APP_VER, "SUSE");
os_ver = os_ver[1];
if (! preg(pattern:"^(SLES15)$", string:os_ver)) audit(AUDIT_OS_NOT, "SUSE SLES15", "SUSE " + os_ver);
if (!get_kb_item("Host/SuSE/rpm-list")) audit(AUDIT_PACKAGE_LIST_MISSING);
cpu = get_kb_item("Host/cpu");
if (isnull(cpu)) audit(AUDIT_UNKNOWN_ARCH);
if (cpu !~ "^i[3-6]86$" && "x86_64" >!< cpu && "s390x" >!< cpu) audit(AUDIT_LOCAL_CHECKS_NOT_IMPLEMENTED, "SUSE " + os_ver, cpu);
sp = get_kb_item("Host/SuSE/patchlevel");
if (isnull(sp)) sp = "0";
if (os_ver == "SLES15" && (! preg(pattern:"^(1)$", string:sp))) audit(AUDIT_OS_NOT, "SLES15 SP1", os_ver + " SP" + sp);
flag = 0;
if (rpm_check(release:"SLES15", sp:"1", reference:"fuse-overlayfs-0.4.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"fuse-overlayfs-debuginfo-0.4.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"fuse-overlayfs-debugsource-0.4.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"fuse3-3.6.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"fuse3-debuginfo-3.6.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"fuse3-debugsource-3.6.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"libfuse3-3-3.6.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"libfuse3-3-debuginfo-3.6.1-3.3.8")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"podman-1.4.4-4.8.1")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"slirp4netns-0.3.0-3.3.3")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"slirp4netns-debuginfo-0.3.0-3.3.3")) flag++;
if (rpm_check(release:"SLES15", sp:"1", reference:"slirp4netns-debugsource-0.3.0-3.3.3")) flag++;
if (flag)
{
if (report_verbosity > 0) security_warning(port:0, extra:rpm_report_get());
else security_warning(0);
exit(0);
}
else
{
tested = pkg_tests_get();
if (tested) audit(AUDIT_PACKAGE_NOT_AFFECTED, tested);
else audit(AUDIT_PACKAGE_NOT_INSTALLED, "podman / slirp4netns / libcontainers-common");
}
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-15664
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-10152
cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-6778
www.nessus.org/u?c3f6900a
bugzilla.suse.com/show_bug.cgi?id=1096726
bugzilla.suse.com/show_bug.cgi?id=1123156
bugzilla.suse.com/show_bug.cgi?id=1123387
bugzilla.suse.com/show_bug.cgi?id=1135460
bugzilla.suse.com/show_bug.cgi?id=1136974
bugzilla.suse.com/show_bug.cgi?id=1137860
bugzilla.suse.com/show_bug.cgi?id=1143386
github.com/containers/libpo\
www.suse.com/security/cve/CVE-2018-15664/
www.suse.com/security/cve/CVE-2019-10152/
www.suse.com/security/cve/CVE-2019-6778/
CVSS2
Attack Vector
LOCAL
Attack Complexity
HIGH
Authentication
NONE
Confidentiality Impact
COMPLETE
Integrity Impact
COMPLETE
Availability Impact
COMPLETE
AV:L/AC:H/Au:N/C:C/I:C/A:C
CVSS3
Attack Vector
LOCAL
Attack Complexity
HIGH
Privileges Required
LOW
User Interaction
REQUIRED
Scope
CHANGED
Confidentiality Impact
HIGH
Integrity Impact
HIGH
Availability Impact
NONE
CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:C/C:H/I:H/A:N
AI Score
Confidence
High
EPSS
Percentile
35.5%