Performs brute force password auditing against Oracle servers.
Running it in default mode it performs an audit against a list of common Oracle usernames and passwords. The mode can be changed by supplying the argument oracle-brute.nodefault at which point the script will use the username- and password- lists supplied with Nmap. Custom username- and password- lists may be supplied using the userdb and passdb arguments. The default credential list can be changed too by using the brute.credfile argument. In case the userdb or passdb arguments are supplied, the script assumes that it should run in the nodefault mode.
In modern versions of Oracle password guessing speeds decrease after a few guesses and remain slow, due to connection throttling.
WARNING: The script makes no attempt to discover the amount of guesses that can be made before locking an account. Running this script may therefor result in a large number of accounts being locked out on the database server.
- the instance against which to perform password guessing
- do not attempt to guess any Oracle default accounts
See the documentation for the unpwdb library.
See the documentation for the creds library.
See the documentation for the tns library.
See the documentation for the brute library.
nmap --script oracle-brute -p 1521 --script-args oracle-brute.sid=ORCL <host>
PORT STATE SERVICE REASON
1521/tcp open oracle syn-ack
| oracle-brute:
| Accounts
| system:powell => Account locked
| haxxor:haxxor => Valid credentials
| Statistics
|_ Perfomed 157 guesses in 8 seconds, average tps: 19
local brute = require "brute"
local coroutine = require "coroutine"
local creds = require "creds"
local io = require "io"
local nmap = require "nmap"
local shortport = require "shortport"
local stdnse = require "stdnse"
local tns = require "tns"
local openssl = stdnse.silent_require "openssl"
description = [[
Performs brute force password auditing against Oracle servers.
Running it in default mode it performs an audit against a list of common
Oracle usernames and passwords. The mode can be changed by supplying the
argument oracle-brute.nodefault at which point the script will use the
username- and password- lists supplied with Nmap. Custom username- and
password- lists may be supplied using the userdb and passdb arguments.
The default credential list can be changed too by using the brute.credfile
argument. In case the userdb or passdb arguments are supplied, the script
assumes that it should run in the nodefault mode.
In modern versions of Oracle password guessing speeds decrease after a few
guesses and remain slow, due to connection throttling.
WARNING: The script makes no attempt to discover the amount of guesses
that can be made before locking an account. Running this script may therefor
result in a large number of accounts being locked out on the database server.
]]
---
-- @see oracle-brute-stealth.nse
--
-- @usage
-- nmap --script oracle-brute -p 1521 --script-args oracle-brute.sid=ORCL <host>
--
-- @output
-- PORT STATE SERVICE REASON
-- 1521/tcp open oracle syn-ack
-- | oracle-brute:
-- | Accounts
-- | system:powell => Account locked
-- | haxxor:haxxor => Valid credentials
-- | Statistics
-- |_ Perfomed 157 guesses in 8 seconds, average tps: 19
--
-- @args oracle-brute.sid - the instance against which to perform password
-- guessing
-- @args oracle-brute.nodefault - do not attempt to guess any Oracle default
-- accounts
--
-- Version 0.3
-- Created 07/12/2010 - v0.1 - created by Patrik Karlsson <[email protected]>
-- Revised 07/23/2010 - v0.2 - added script usage and output and
-- - oracle-brute.sid argument
-- Revised 07/25/2011 - v0.3 - added support for guessing default accounts
-- changed code to use ConnectionPool
-- Revised 03/13/2012 - v0.4 - revised by László Tóth
-- added support for SYSDBA accounts
-- Revised 08/07/2012 - v0.5 - revised to suit the changes in brute
-- library [Aleksandar Nikolic]
--
-- Summary
-- -------
-- x The Driver class contains the driver implementation used by the brute
-- library
author = "Patrik Karlsson"
license = "Same as Nmap--See https://nmap.org/book/man-legal.html"
categories = {"intrusive", "brute"}
portrule = shortport.port_or_service(1521, "oracle-tns", "tcp", "open")
local ConnectionPool = {}
local sysdba = {}
Driver =
{
new = function(self, host, port, sid )
local o = { host = host, port = port, sid = sid }
setmetatable(o, self)
self.__index = self
return o
end,
--- Connects performs protocol negotiation
--
-- @return true on success, false on failure
connect = function( self )
local MAX_RETRIES = 10
local tries = MAX_RETRIES
self.helper = ConnectionPool[coroutine.running()]
if ( self.helper ) then return true end
self.helper = tns.Helper:new( self.host, self.port, self.sid, brute.new_socket() )
-- This loop is intended for handling failed connections
-- A connection may fail for a number of different reasons.
-- For the moment, we're just handling the error code 12520
--
-- Error 12520 has been observed on Oracle XE and seems to
-- occur when a maximum connection count is reached.
local status, data
repeat
if ( tries < MAX_RETRIES ) then
stdnse.debug2("Attempting to re-connect (attempt %d of %d)", MAX_RETRIES - tries, MAX_RETRIES)
end
status, data = self.helper:Connect()
if ( not(status) ) then
stdnse.debug2("ERROR: An Oracle %s error occurred", data)
self.helper:Close()
else
break
end
tries = tries - 1
stdnse.sleep(1)
until( tries == 0 or data ~= "12520" )
if ( status ) then
ConnectionPool[coroutine.running()] = self.helper
end
return status, data
end,
--- Attempts to login to the Oracle server
--
-- @param username string containing the login username
-- @param password string containing the login password
-- @return status, true on success, false on failure
-- @return brute.Error object on failure
-- creds.Account object on success
login = function( self, username, password )
local status, data = self.helper:Login( username, password )
if ( sysdba[username] ) then
return false, brute.Error:new("Account already discovered")
end
if ( status ) then
self.helper:Close()
ConnectionPool[coroutine.running()] = nil
return true, creds.Account:new(username, password, creds.State.VALID)
-- Check for account locked message
elseif ( data:match("ORA[-]28000") ) then
return true, creds.Account:new(username, password, creds.State.LOCKED)
-- Check for account is SYSDBA message
elseif ( data:match("ORA[-]28009") ) then
sysdba[username] = true
return true, creds.Account:new(username .. " as sysdba", password, creds.State.VALID)
-- check for any other message
elseif ( data:match("ORA[-]%d+")) then
stdnse.debug3("username: %s, password: %s, error: %s", username, password, data )
return false, brute.Error:new(data)
-- any other errors are likely communication related, attempt to re-try
else
self.helper:Close()
ConnectionPool[coroutine.running()] = nil
local err = brute.Error:new(data)
err:setRetry(true)
return false, err
end
return false, brute.Error:new( data )
end,
--- Disconnects and terminates the Oracle TNS communication
disconnect = function( self )
return true
end,
}
local function fail (err) return stdnse.format_output(false, err) end
action = function(host, port)
local DEFAULT_ACCOUNTS = "nselib/data/oracle-default-accounts.lst"
local sid = stdnse.get_script_args('oracle-brute.sid') or
stdnse.get_script_args('tns.sid')
local engine = brute.Engine:new(Driver, host, port, sid)
local mode = "default"
if ( not(sid) ) then
return fail("Oracle instance not set (see oracle-brute.sid or tns.sid)")
end
local helper = tns.Helper:new( host, port, sid )
local status, result = helper:Connect()
if ( not(status) ) then
return fail("Failed to connect to oracle server")
end
helper:Close()
local f
if ( stdnse.get_script_args('userdb') or
stdnse.get_script_args('passdb') or
stdnse.get_script_args('oracle-brute.nodefault') or
stdnse.get_script_args('brute.credfile') ) then
mode = nil
end
if ( mode == "default" ) then
f = nmap.fetchfile(DEFAULT_ACCOUNTS)
if ( not(f) ) then
return fail(("Failed to find %s"):format(DEFAULT_ACCOUNTS))
end
f = io.open(f)
if ( not(f) ) then
return fail(("Failed to open %s"):format(DEFAULT_ACCOUNTS))
end
engine.iterator = brute.Iterators.credential_iterator(f)
end
engine.options.script_name = SCRIPT_NAME
status, result = engine:start()
return result
end